Serving the Joliet area  ·  (815) 600-7191  ·  Open Mon-Sun 7am-7pm
📞 (815) 600-7191 Free Quote

Metal Roofing in Plainfield, IL (60544) · Local Professionals

Joliet Metal Roofing · Fast response in Plainfield and the Joliet area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+148Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Plainfield's mix of 1800s farmhouses near the Village Green and newer subdivisions off Route 59 means roofs here face everything from prairie wind to heavy lake-effect-style snow. If you live in a two-story in Grande Park or a ranch near Plainfield North High School, you've probably noticed how hail and ice can chew up a shingle roof fast.

That's why homeowners in 60544 call Joliet Metal Roofing. We know the tight lot lines in the older parts of town, the HOA rules in the big subdivisions, and the way clay soil and mature silver maples can make drainage and access tricky. We're based just down the road in Joliet, so we're not guessing about local conditions.

Metal Roofing in Plainfield (60544)

Plainfield sits on flat glacial plain with clay-heavy soil, and that affects how water moves around your foundation and how we stage a job. In the historic downtown area, you've got steep gabled roofs on Victorian-era homes where flashing and snow guards need to be detailed carefully. In the sprawling subdivisions west of Route 59, like Grande Park or the homes near Heritage Grove, you're often dealing with HOA design review before we can even order panels. And on the older east side, narrow driveways and mature trees mean we have to plan material drops and crane placement to avoid damaging landscaping or blocking neighbors.

Our team has worked on everything from corrugated panel barns out toward Plainfield's rural edges to standing seam roofs on new construction. We know the local building department's inspection rhythm and how to document storm damage for insurance when a derecho rolls through. We're fully insured with general liability and workers' compensation, so you're covered if anything happens on your property.

Our services in Plainfield

How a Job Works in Plainfield

Step 1: You call us at (815) 600-7191 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We'll walk the roof, check for soft spots, failed fasteners, or ice dam damage, and talk through options like a full replacement, a retrofit over existing shingles, or a repair. You get a written estimate with clear pricing before any work starts.

Step 2: Once you approve, we pull the permit if one is required by the Village of Plainfield, and we coordinate with your HOA if you're in a subdivision with design guidelines. On installation day, we protect your landscaping with tarps, set up a safe staging area, and keep noise and foot traffic to a minimum. For tight lots in the older parts of town, we plan panel delivery and crane access in advance so we don't block your driveway or your neighbor's.

Step 3: After the work is done, we do a magnet sweep for nails, haul away all old materials, and walk the property with you. We don't leave until you've seen the finished roof, gutters, and flashing, and you know how to reach us if anything comes up later.

Pricing for metal roofing in Plainfield depends on the size and pitch of your roof, the material you choose, and how accessible the property is. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, standing seam starts around $10 per square foot, and metal shingle or stone-coated steel starts around $9 per square foot. A typical repair, like fixing a leak or replacing fasteners, starts around $450, while a full re-roof over existing shingles can start around $7 per square foot. These are starting prices, not final quotes, because every roof is different. Call us at (815) 600-7191 for a free estimate and a realistic number for your home.

My house is in the historic district near the Village Green. Can I still get a standing seam metal roof?
Possibly, but it depends on the design review guidelines for your specific block. Some historic districts restrict panel profiles or colors to match the neighborhood character. We can help you understand what's allowed and suggest profiles that meet the rules while still giving you the durability of metal. We always recommend checking with the Village of Plainfield before ordering materials.
A storm just blew through Plainfield and I think I have wind damage on my roof. How fast can you get out?
We offer free storm and wind damage inspections and prioritize emergency calls after major weather events. Call us at (815) 600-7191 and we'll schedule the earliest available slot, often within 24 to 48 hours depending on demand. If there's an active leak, we can also discuss temporary measures to prevent further damage while you wait for a full repair.
What's the typical cost to replace a roof on a two-story house in Grande Park?
Most two-story homes in Grande Park have roofs in the 2,000 to 3,000 square foot range. A metal roof replacement typically starts around $9 per square foot for metal shingle or stone-coated steel, so you're looking at a starting range of roughly $18,000 to $27,000, depending on pitch, complexity, and material. Standing seam runs a bit higher. We give you an exact quote after inspecting the roof.
Do I need a permit from the Village of Plainfield for a metal roof replacement?
In most cases, yes. Plainfield requires a roofing permit for a full replacement or re-roof, and the requirements can vary depending on the scope of work and whether your home is in a historic district. We handle the permit application for you and make sure the work meets local code, including limits on how many layers of shingles can be recovered. We always confirm current rules with the Village before starting.
My HOA requires approval before I change my roof. Can you help with that?
Yes. Many subdivisions in Plainfield, including Grande Park and others, have architectural review committees that must approve roof material and color changes. We can provide product samples, specification sheets, and color options to submit with your application. We'll also coordinate scheduling around the HOA's approval timeline so we don't order materials before you have the green light.
Are you fully insured for work on my Plainfield property?
Yes. We carry general liability insurance and workers' compensation coverage for every job. That means if a worker is injured on your property or something is accidentally damaged, you're protected.
What maintenance does a metal roof need in Plainfield's climate?
Metal roofs are low maintenance, but in our area you should check fasteners and seals annually, especially after winter. Ice dams can form at the eaves on steep roofs, so we recommend snow guards if you don't have them. Keep gutters clear of leaves from the silver maples and oaks common here, and have us inspect flashing around chimneys and skylights every few years. A quick inspection now can prevent a leak later.
Why choose us?

Trusted professionals in Joliet

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Joliet

All your work handled by qualified professionals in Joliet

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

148+ Verified Client Reviews in Joliet

⭐⭐⭐⭐⭐ 4.9/5 · 148 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Joliet · Response within 24h · No commitment · ☎ (815) 600-7191

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Joliet ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm