Serving the Joliet area  ·  (815) 600-7191  ·  Open Mon-Sun 7am-7pm
📞 (815) 600-7191 Free Quote

Metal Roofing in Bolingbrook, IL (60440) · Local Professionals

Joliet Metal Roofing · Fast response in Bolingbrook and the Joliet area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+148Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bolingbrook is a town of subdivisions built mostly between the 1980s and 2000s, with two-story homes on tight lots under young silver maples and honeylocusts. The shingle roofs on these houses are now hitting the end of their service life, and many homeowners are switching to metal for the long haul. We see it every week in neighborhoods off Boughton Road and Lily Cache Lane, where the original builder-grade roofs are due for replacement and the trees have grown up enough to drop limbs and shade the deck.

That is why folks in 60440 call Joliet Metal Roofing. We know the housing stock here, from the ranches near the Bolingbrook Golf Club to the newer builds off Weber Road, and we specialize in metal roof over shingles and gutters for metal roofs. We are fully insured with general liability and workers' compensation, and we treat your property like it is our own.

Metal Roofing in Bolingbrook (60440)

Bolingbrook sits on flat glacial plain with clay soil, and that matters for roofing. The clay holds water, so proper drainage and gutter sizing are critical, especially on the older subdivisions where the grade has settled over the decades. Most of the homes here are two-story subdivision builds from the 1980s to 2000s, with steep gables and complex rooflines that create valleys and transitions where leaks love to start. The tight lot spacing means we often work with limited access, staging materials in the driveway and using ladders carefully to avoid landscaping. And the young trees, while nice for shade, drop limbs and fill gutters, so we always check for pest damage and debris buildup when we inspect.

Our team has been serving Bolingbrook and the greater Joliet area for years. We have seen how the freeze-thaw cycles and ice dams at the eaves can back up under shingles, and we know how to install metal roofing that handles it. Whether it is a ranch near the Promenade Bolingbrook or a two-story in the Winston Park area, we bring the same attention to detail.

Our services in Bolingbrook

How a Job Works in Bolingbrook

Step 1: You call us at (815) 600-7191 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your roof and attic, and talk through your options, from a full replacement to a metal roof over shingles if your existing layers allow it. We also check your gutters and flashing, since those are common trouble spots.

Step 2: Once you approve the scope, we handle the permit application with the City of Bolingbrook. Permit thresholds and inspection requirements vary, so we verify everything with the local building department before we start. If your home is in an HOA, we coordinate the design review and provide the panel profile and color samples they need. On installation day, our crew protects your landscaping, sets up safe access on tight lots, and keeps the site organized. We install your new metal roof, gutters, and any snow guards or flashing, working around your schedule.

Step 3: After the work is done, we do a thorough cleanup, magnet sweep for nails, and walk through the finished roof with you. We make sure you understand the warranty and maintenance, and we leave your property clean. We do not consider the job finished until you are satisfied.

Pricing for metal roofing in Bolingbrook depends on the size and complexity of your roof, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. For repairs, metal roof leak repair starts at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Gutters for metal roofs start at $9 per linear foot, and snow guards start at $1,200. We always provide a free estimate with a clear breakdown, so call (815) 600-7191 to get started.

My Bolingbrook subdivision home was built in the 1990s and still has the original shingles. Can you install metal over them?
Yes, in many cases we can. Bolingbrook code allows a metal roof over existing shingles if there is only one layer and the deck is sound. We inspect the roof first to confirm it meets code and that the fasteners will hold. This retrofit saves you the cost of tear-off and landfill fees, and it is a popular option in neighborhoods like Winston Park and Indian Oaks.
A storm just knocked limbs onto my roof and I have a leak. How fast can you respond in Bolingbrook?
We offer free storm and wind damage inspections and prioritize active leaks. Call us at (815) 600-7191 and we will schedule a visit as soon as possible, often within 24 to 48 hours. We can tarp the area to prevent further damage and provide a written estimate for repairs.
What does a typical metal roof cost for a two-story Bolingbrook home?
Most two-story homes in Bolingbrook have roofs between 1,500 and 2,500 square feet. At our starting rates, a metal roof over shingles might run $10,500 to $17,500, while a standing seam replacement could be $15,000 to $25,000. The exact price depends on roof complexity, access, and material. We give you a detailed free estimate.
Do I need a permit for a metal roof in Bolingbrook, and how long does it take?
Yes, a permit is generally required for a full replacement or re-roof. The City of Bolingbrook Building Department handles these, and turnaround is usually a few business days to a couple of weeks. We handle the application and inspections for you, and we verify current requirements with the city before starting.
My HOA requires approval for roof color. Can you help with that?
Absolutely. Many Bolingbrook HOAs have design review rules for roof color and profile. We provide color samples and manufacturer specs for your submission, and we can coordinate with your HOA board if needed. We will not order materials until you have written approval.
Are you fully insured for work at my Bolingbrook home?
Yes, we carry general liability and workers' compensation insurance. Our team is fully covered, so you are protected if anything happens on your property.
What maintenance does a metal roof need in Bolingbrook's climate?
Bolingbrook's freeze-thaw cycles and summer storms mean you should check fasteners and seals annually, clean gutters to prevent ice dams, and remove debris after storms. We offer inspections and maintenance plans. Keeping trees trimmed away from the roof also helps, especially with the young maples and honeylocusts common here.
Why choose us?

Trusted professionals in Joliet

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Joliet

All your work handled by qualified professionals in Joliet

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

148+ Verified Client Reviews in Joliet

⭐⭐⭐⭐⭐ 4.9/5 · 148 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Joliet · Response within 24h · No commitment · ☎ (815) 600-7191

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Joliet ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm